Welch Allyn OEM 3.5V Lithium-Ion Rechargeable Handle [71910]
Description
Genuine Welch Allyn 3.5V lithium-ion rechargeable handle for Welch Allyn 3.5V otoscope, ophthalmoscope and other instrument heads. The 71910 is the handle only, with the 71960 battery installed. It charges in the Welch Allyn 719-DSK desk charger or with the 71950 AC charging module, sold separately.
Overview
- Genuine Welch Allyn part number 71910
- 3.5V lithium-ion rechargeable power handle
- Powers Welch Allyn 3.5V instrument heads
- Uses the Welch Allyn Lithium Ion Battery [71960]
- Charges in the Welch Allyn Universal Desk Charger [719-DSK]
- Average run time of about 110 minutes between charges (Welch Allyn rating)
- Low-battery indicator light
OEM part
This is the genuine Welch Allyn 71910 handle. Lite Source is an authorized Welch Allyn distributor.
Compatibility
| Fits | Welch Allyn 3.5V instrument heads, including otoscopes, ophthalmoscopes, retinoscopes, strabismoscopes, episcopes and illuminators |
|---|---|
| Does not fit | Welch Allyn 2.5V instrument heads |
How to identify your part
- The handle is not marked with a model number. Check the packaging or your invoice for 71910.
- Welch Allyn sells this 3.5V lithium-ion handle in several versions: 71910 (handle only), 71900 (with AC charging module), 71930 (with well adapter) and the Welch Allyn USB Rechargeable Power Handle [71900-USB]. Check which charging parts you already have before ordering.
Not sure? Send us a photo of the old part and the equipment label, or call 800-523-0860.
What's included
- 1 Welch Allyn 71910 3.5V lithium-ion handle with 71960 battery installed
- Does not include a charger or the 71950 AC charging module
How to install
Replace the battery
- Turn the handle off, remove it from the charger and remove the instrument head.
- Place the tool included with the 71960 replacement battery around the neck of the battery section.
- Hold the battery section with the tool and turn the rheostat section (the top of the handle) counterclockwise until it comes off.
- Insert the rheostat section into the new battery section and turn it clockwise until tight. Check that it is secure.
- Charge the handle fully before use. A dead battery takes 16 continuous hours to charge.
Attach an instrument head
- Gently push the head onto the top of the handle and twist.
- To remove, repeat the gentle and twist.
Handling and warranty
- The lithium-ion battery has no memory effect and does not need to be fully discharged between charges.
- Recycle a used battery through Welch Allyn's battery recycling service (Welch Allyn batteries only, United States only) or at a local battery recycling drop-off. Don't put it in the trash.
Covered by Welch Allyn's 1-year manufacturer warranty. Welch Allyn decides whether a part is defective and may require you to contact them for warranty repairs. See our Return Policy.
Frequently asked questions
Does the Welch Allyn 71910 handle come with a charger?
No. The 71910 is the handle only. Charge it in the Welch Allyn 719-DSK desk charger or with the Welch Allyn 71950 AC charging module. For a handle that charges by USB, see the Welch Allyn 71900-USB.
What's the difference between the Welch Allyn 71910 and the 719-3?
The 719-3 is Welch Allyn's newer 3.5V Lithium-Ion Plus handle, which charges by USB-C or in the Welch Allyn universal desk charger; the 71910 charges in the Welch Allyn 719-DSK desk charger or with the 71950 AC charging module. Both power Welch Allyn 3.5V instrument heads. They use different replacement batteries: the 71910 uses the 71960, and the 719-3 uses the 719-BATT.
Which instrument heads work with the 71910 handle?
The Welch Allyn 71910 powers Welch Allyn 3.5V instrument heads, including otoscopes, ophthalmoscopes, retinoscopes, strabismoscopes, episcopes and illuminators.
What battery does the Welch Allyn 71910 use?
The 71910 uses the Welch Allyn 71960 3.5V lithium-ion battery. It does not use the 72200 NiCd battery found in older 71670 and 71000 handles.
How do I replace the battery in the 71910 handle?
Remove the instrument head, then hold the battery section with the tool included with the 71960 replacement battery and turn the rheostat section (the top of the handle) counterclockwise to remove it. Turn the rheostat section clockwise onto the new battery section until tight, then charge the handle fully before use.
Specifications
- Common Item No.
- 71910
- Equipment Brand
- Welch Allyn
- Equipment Type
- Handle
- Voltage
- 3.5V
- Product Brand
- Welch Allyn/Hillrom/Baxter
- Subtype
- Handle
- GTIN
- 00732094139969
Welch Allyn OEM 3.5V Lithium-Ion Rechargeable Handle [71910]
Need help finding the right part?
Our team has been helping medical & eye care practices find the right part since 1985.
Description
Genuine Welch Allyn 3.5V lithium-ion rechargeable handle for Welch Allyn 3.5V otoscope, ophthalmoscope and other instrument heads. The 71910 is the handle only, with the 71960 battery installed. It charges in the Welch Allyn 719-DSK desk charger or with the 71950 AC charging module, sold separately.
Overview
- Genuine Welch Allyn part number 71910
- 3.5V lithium-ion rechargeable power handle
- Powers Welch Allyn 3.5V instrument heads
- Uses the Welch Allyn Lithium Ion Battery [71960]
- Charges in the Welch Allyn Universal Desk Charger [719-DSK]
- Average run time of about 110 minutes between charges (Welch Allyn rating)
- Low-battery indicator light
OEM part
This is the genuine Welch Allyn 71910 handle. Lite Source is an authorized Welch Allyn distributor.
Compatibility
| Fits | Welch Allyn 3.5V instrument heads, including otoscopes, ophthalmoscopes, retinoscopes, strabismoscopes, episcopes and illuminators |
|---|---|
| Does not fit | Welch Allyn 2.5V instrument heads |
How to identify your part
- The handle is not marked with a model number. Check the packaging or your invoice for 71910.
- Welch Allyn sells this 3.5V lithium-ion handle in several versions: 71910 (handle only), 71900 (with AC charging module), 71930 (with well adapter) and the Welch Allyn USB Rechargeable Power Handle [71900-USB]. Check which charging parts you already have before ordering.
Not sure? Send us a photo of the old part and the equipment label, or call 800-523-0860.
What's included
- 1 Welch Allyn 71910 3.5V lithium-ion handle with 71960 battery installed
- Does not include a charger or the 71950 AC charging module
How to install
Replace the battery
- Turn the handle off, remove it from the charger and remove the instrument head.
- Place the tool included with the 71960 replacement battery around the neck of the battery section.
- Hold the battery section with the tool and turn the rheostat section (the top of the handle) counterclockwise until it comes off.
- Insert the rheostat section into the new battery section and turn it clockwise until tight. Check that it is secure.
- Charge the handle fully before use. A dead battery takes 16 continuous hours to charge.
Attach an instrument head
- Gently push the head onto the top of the handle and twist.
- To remove, repeat the gentle and twist.
Handling and warranty
- The lithium-ion battery has no memory effect and does not need to be fully discharged between charges.
- Recycle a used battery through Welch Allyn's battery recycling service (Welch Allyn batteries only, United States only) or at a local battery recycling drop-off. Don't put it in the trash.
Covered by Welch Allyn's 1-year manufacturer warranty. Welch Allyn decides whether a part is defective and may require you to contact them for warranty repairs. See our Return Policy.
Frequently asked questions
Does the Welch Allyn 71910 handle come with a charger?
No. The 71910 is the handle only. Charge it in the Welch Allyn 719-DSK desk charger or with the Welch Allyn 71950 AC charging module. For a handle that charges by USB, see the Welch Allyn 71900-USB.
What's the difference between the Welch Allyn 71910 and the 719-3?
The 719-3 is Welch Allyn's newer 3.5V Lithium-Ion Plus handle, which charges by USB-C or in the Welch Allyn universal desk charger; the 71910 charges in the Welch Allyn 719-DSK desk charger or with the 71950 AC charging module. Both power Welch Allyn 3.5V instrument heads. They use different replacement batteries: the 71910 uses the 71960, and the 719-3 uses the 719-BATT.
Which instrument heads work with the 71910 handle?
The Welch Allyn 71910 powers Welch Allyn 3.5V instrument heads, including otoscopes, ophthalmoscopes, retinoscopes, strabismoscopes, episcopes and illuminators.
What battery does the Welch Allyn 71910 use?
The 71910 uses the Welch Allyn 71960 3.5V lithium-ion battery. It does not use the 72200 NiCd battery found in older 71670 and 71000 handles.
How do I replace the battery in the 71910 handle?
Remove the instrument head, then hold the battery section with the tool included with the 71960 replacement battery and turn the rheostat section (the top of the handle) counterclockwise to remove it. Turn the rheostat section clockwise onto the new battery section until tight, then charge the handle fully before use.
Specifications
- Common Item No.
- 71910
- Equipment Brand
- Welch Allyn
- Equipment Type
- Handle
- Voltage
- 3.5V
- Product Brand
- Welch Allyn/Hillrom/Baxter
- Subtype
- Handle
- GTIN
- 00732094139969


Español (México)![Welch Allyn 3.5V Li-Ion Rechargeable Handle [71910] Welch Allyn 3.5V Li-Ion Rechargeable Handle [71910]](/product/image/mediumlarge/11378.0.jpeg)